Huawei AP371 eKit Access Point
AP371(11be indoor,2+2 dual bands, smart antenna, USB,BLE)
Installation Type Wall
Ceiling
T-Rail
Dimensions (H x W x D) [mm(in.)] Diameter x depth: 180 mm x 35 mm (7.09 in. x 1.38 in.)
Storage NAND Flash 256 MB
Console port Bluetooth serial port (reserved only)
Maximum power consumption [W] 13.60 (excluding USB)
Maximum heat dissipation [BTU/hour] 44.1 BTU/hour
Power supply mode PoE
DC power adapter
Rated input voltage [V] 12 V
Input voltage range [V] DC: 12 V + 10
PoE: 802.3at/af
Service port surge protection PoE port:
Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B
Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B
Maximum number of physical ports on the entire device 2.5GE (RJ45) x 1, 100M/1000M/2500 Mbit/s auto-sensing
Long-term operating temperature [C(F)] –10C to +50C (14F to 122F) (From 1800 m to 5000 m [5905.51 ft. to
16404.20 ft.], the maximum temperature of the device decreases by 1C [1.8F] for every 300 m [984.25 ft.] increase in altitude.)
Storage temperature [C(F)] –40C to +70C (–40F to +158F)
Long-term operating relative humidity [RH] 5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)] –60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa] 53kPa - 106kPa ETSI 300 019-2-3
Ground floating ground
USB The USB function is unavailable and will be supported through
software upgrade in the future.
BLE BLE5.4
Radio number 2
Operating frequency band 2.4GHz
5GHz
MIMO spatial streams Radio 0 (2.4 GHz): 2x2
Radio 1 (5 GHz): 2x2
Wi-Fi standard 2.4 GHz: 802.11b/g/n/ax/be
5 GHz:802.11a/n/ac/ac Wave 2/ax/be
Radio interface Built-in smart antennas
Antenna gain 2.4 GHz:
4 dBi/chain (peak gain)
1 dBi (combined gain)
5 GHz:
5 dBi/chain (peak gain)
3 dBi (combined gain)
BLE: 4 dBi (peak gain)
Maximum transmit power 2.4 GHz:
20 dBm/chain
23 dBm (combined power)
5 GHz:
20 dBm/chain
23 dBm (combined power)
Singal radio transmit power [dBm] 2.4G: -10 dBm to 20 dBm/chain
5G: -10 dBm to 20 dBm/chain
MTBF [year] 158.215 year
MTTR [hour] 2 hour
Frequency stability [ppm] +/-20
802.3at power supply description No function is limited.
802.3af power supply description The USB function is not supported. Other functions are not restricted.
DC power supply description No function is limited.
Products You May Like
Huawei S220-48P4S eKitEngine Network Switch
Huawei eKitEngine AP263 Wi-Fi 6 In-wall Access Point
Huawei USG6000E-S03 eKitEngine Firewall Switch
Huawei eKitEngine S380-L4T1T Multi-Service Gateway
Huawei S220-48T4S eKitEngine Network Switch
Huawei S220-48T4X eKitEngine Network Switch